Colored Silicone Waterproof Coating

Summary:

Get A Quote

Related products

Product Description

PRODUCT DESCRIPTION
Organic silicone waterproof coating is a water-based environmental friendly waterproof coating made of silicone rubber latex and its composite lotion as the main base material, mixed with inorganic fillers and various additives.

PRODUCT FEATURES

This product is a water-based single component waterproof coating, which forms a waterproof layer with strong crack resistance and impermeability, good waterproof effect, and long service life. Its main features are:
▪ The overall film-forming property is good, and after the coating film is cured, it forms a continuous, uniform, and complete rubber like elastic body. Therefore, the waterproof layer made of it has no joints, which is more suitable for the construction of irregular parts;
▪ Has good elongation and tensile strength;
▪ Single component, water-based and can be made into colored coatings;
▪ Easy to construct, capable of scraping, coating, and brushing. The humidity requirements for the base layer are not strict, and construction can be carried out on damp surfaces. Cold construction is particularly advantageous for construction sites that prohibit the use of open flames and have complex shapes;
▪ Easy to use.

SCOPE OF APPLICATION
Used for waterproofing, anti-seepage, moisture-proof, and gas barrier purposes in new and old roofs, rooftops, basements, bathrooms, swimming pools, warehouses, and bridge engineering.

CONSTRUCTION TECHNOLOGY
▪ Grassroots treatment: The surface of the grassroots should be smooth and free from unevenness, sanding, and other phenomena.
▪ Joint treatment: If there are cracks of 3mm or more on the roof, sealing material should be filled and then a scraping coating should be applied.
▪ Coating application: Rolling, scraping, coating, and brushing can be used for construction. Generally, 3-4 coats are applied, with a reference dosage of 0.8-1.0 kilograms per square meter for each coat.
▪ The total thickness of the coating is above 1.5mm, and the interval between each coating is 2-12h (depending on weather conditions). 1-2 layers of fiberglass cloth or other matrix materials can be added in the middle of the coating.

Keywords:

Category:

Waterproof Coating Series

Product Inquiry

Attention: Please leave your phone number or email address, and our professionals will contact you as soon as possible!

Submit