PRODUCT DESCRIPTION  
Transparent waterproof adhesive for exterior walls is a waterproof material developed for building exterior wall leakage that does not affect the original appearance of the building. The product is transparent, colorless, and has strong permeability. After film formation, it can waterproof and seal the leakage points and cracks of the exterior wall, and has particularly superior UV resistance and outdoor weather resistance.

PRODUCT FEATURES

This product is a water-based single component waterproof coating, which forms a waterproof layer with strong crack resistance and impermeability, good waterproof effect, and long service life. Its main features are:
▪ The overall film-forming property is good, and after the coating film is cured, it forms a continuous, uniform, and complete rubber like elastic body. Therefore, the waterproof layer made of it has no joints, which is more suitable for the construction of irregular parts;
▪ Has good elongation and tensile strength;
▪ Easy to construct, capable of scraping, coating, and brushing. The humidity requirements for the base layer are not strict, and construction can be carried out on damp surfaces. Cold construction is particularly advantageous for construction sites that prohibit the use of open flames and have complex shapes.

SCOPE OF APPLICATION 
▪ Waterproof repair of leakage on the exterior walls of various buildings, anti-corrosion and anti-seepage coating of inorganic materials such as wall tiles, marble, granite, cement-based, etc.
▪ Anti corrosion and waterproof coating of inorganic materials such as cement, ceramics, and glass.
▪ Bottom layer, new and old roof walls, new and old basements, bathrooms, bathhouses, parking platforms, parking platforms, swimming pools, civil air defense engineering anti-seepage and moisture-proof, irregular structures, complex parts and other decorative surfaces for waterproofing (anti mold) and anti-corrosion.

CONSTRUCTION TECHNOLOGY
▪ Grassroots treatment: The surface of the grassroots should be smooth and free from unevenness, sanding, and other phenomena.
▪ Joint treatment: If there are cracks of 3mm or more on the roof, sealing material should be filled and then a scraping coating should be applied.
▪ Coating application: Rolling, scraping, coating, and brushing can be used for construction. Generally, 3-4 coats are applied, with a reference dosage of 0.8-1.0 kilograms per square meter for each coat.
▪ The total thickness of the coating is above 1.5mm, and the interval between each coating is 2-12h (depending on weather conditions).